Termoplastdrage med alfabetet
Pris ekskl. mva
44 480,00 kr
Pris inkl. mva
55 600,00 kr
Beskrivelse
Termoplastdrage med alfabetet
Stor og flott drage i rød og grønn termoplast.
Dragen har store bokstaver og kan slynges rundt i skolegården slik dere ønsker.
Hopp, gå, lek eller løp gjennom alfabetet.
Dragen måler: 1035 cm
Denne termoplastbanen kan bidra til utendørs undervisning ved å gi barn kjennskap til bokstaver gjennom lek og bevegelse. Flere leker kan kombineres, som for eksempel «Finn på ord».
Forslag til bokstav- og ordlek:
Alle deltakerne stiller seg på rekke.
Første deltaker kaster en hinkestein.
Deltakeren hopper bort til bokstaven som steinen lander på.
Deretter skal deltakeren finne på X antall ord som begynner med denne bokstaven.
Neste deltaker tar turen.
Kan for eksempel brukes i språkundervisning eller gjøres vanskeligere ved å bøye ordene.
Datasheet
| Field | Description |
|---|---|
| Brand | DecoMark |
| EU Brand Responsible | GEVEKO Markings |
| Country of Origin | Denmark |
| Material Composition | Preformed decorative thermoplastic. Approx. 20% binding agent, 30% titanium and white filler, 25% white sand and 25% glass beads |
| Contains Latex | No |
| Contains Hazardous Substances | No |
| Compliance | Contains none of the substance which is either on the Candidate List of substances of very high concern, or recommended for inclusion in Annex XIV or Annex XVII under REACH EC 1207/2006 |
| Intended Usage | Preformed thermoplastic decorative marking material for asphalt areas with none or low volume traffic such as playgrounds, bike routes, pedestrian routes and decorative areas. Application on non bitumen surface use primer. The combination of durability and anti skid make it ideally 'fit for purpose' |
| Product Description | Alkyd based preformed thermoplastic material capable of conforming to ground contours and geometries. Can be applied at temperatures down to 10 degrees Celsius. Below this temperature extra care must be taken during storage and application. Sets rapidly and allows reopening to traffic 20 minutes after application |
| System Recommendation | For retro and antiskid use drop on material UCme 850-180-25%. For high antiskid only use drop on material UCme Glass Grains 850-250 |
| Colour and Design | Available in 28 standard colours and various designs |
| Easy System | Can be supplied in Easy System to minimize the various pieces in the symbol or sign |
| Application Equipment | Conventional gas torch with post sprinkling of drop on material |
| Application Temperature | 200 to 230 degrees Celsius. All visible temperature indicators in the material must be closed |
| Adhesion Test | Perform a chisel test to verify adhesion |
| Set Up Time | 10 minutes at a surface temperature of 20 degrees Celsius and light breeze |
| Packaging | Flat packed in 60 x 100 cm and 50 x 50 cm boxes that protect against sunlight and moisture |
| Storage and Handling | Store flat and dry at temperatures above 2 degrees C and below 32 degrees Celsius with maximum 25 packs in height. Shelf life up to two years from production date |
| Safety | Not suitable for children under 3 years old |