Tabel blæksprutte i termoplast

Denne søde tabel sprutte kan være med til at hjælpe børn og unge med kendskab til tabellerne.

I de 8 fangearme er der de små tabeller placeret. Det giver børn og unge mulighed for at løbe, hoppe, lege , eller gå tabellerne igennem.

Fx. Kan én af de mange lege som denne tabel sprutte indbyder til være at man ikke må hoppe videre på armene før næste tal er sagt.
Blæksprutten kan være med til at understøtte den aktive udendørs undervisning i matematik, og i frikvarteret kan den bruges i leg og sjov.

Størrelse: 300 cm x 209 cm

Blæksprutten monteres i termoplast. Termoplast er det samme materiale som bliver brugt til at lave vejstriber, og andre vejmarkeringer med. Det har en holdbarhed i 8-10 år, alt afhængig af underlaget. Termoplast kan laves på fliser, beton eller asfalt. Prisen er inklusiv montering.

I kan læse mere om termoplast og monteringen lige her: Termoplast

Field	Description
Brand	DecoMark
EU Brand Responsible	GEVEKO Markings
Country of Origin	Denmark
Material Composition	Preformed decorative thermoplastic. Approx. 20% binding agent, 30% titanium and white filler, 25% white sand and 25% glass beads
Contains Latex	No
Contains Hazardous Substances	No
Compliance	Contains none of the substance which is either on the Candidate List of substances of very high concern, or recommended for inclusion in Annex XIV or Annex XVII under REACH EC 1207/2006
Intended Usage	Preformed thermoplastic decorative marking material for asphalt areas with none or low volume traffic such as playgrounds, bike routes, pedestrian routes and decorative areas. Application on non bitumen surface use primer. The combination of durability and anti skid make it ideally 'fit for purpose'
Product Description	Alkyd based preformed thermoplastic material capable of conforming to ground contours and geometries. Can be applied at temperatures down to 10 degrees Celsius. Below this temperature extra care must be taken during storage and application. Sets rapidly and allows reopening to traffic 20 minutes after application
System Recommendation	For retro and antiskid use drop on material UCme 850-180-25%. For high antiskid only use drop on material UCme Glass Grains 850-250
Colour and Design	Available in 28 standard colours and various designs
Easy System	Can be supplied in Easy System to minimize the various pieces in the symbol or sign
Application Equipment	Conventional gas torch with post sprinkling of drop on material
Application Temperature	200 to 230 degrees Celsius. All visible temperature indicators in the material must be closed
Adhesion Test	Perform a chisel test to verify adhesion
Set Up Time	10 minutes at a surface temperature of 20 degrees Celsius and light breeze
Packaging	Flat packed in 60 x 100 cm and 50 x 50 cm boxes that protect against sunlight and moisture
Storage and Handling	Store flat and dry at temperatures above 2 degrees C and below 32 degrees Celsius with maximum 25 packs in height. Shelf life up to two years from production date
Safety	Not suitable for children under 3 years old

Meny

Tabel blæksprutte i termoplast

Beskrivelse